Language - Yamaha RX RX-Z7 Owner's Manual

■ Trigger Output (Trigger output)
Use this feature to select the functions of each TRIGGER
OUT jack of this unit.
Choice
Trigger1 Sets the functions for the TRIGGER OUT 1
jack.
Trigger2 Sets the functions for the TRIGGER OUT 2
jack.
Trigger Mode (Trigger mode)
Choice
Power Select this setting to send the voltage signals at
the selected TRIGGER OUT jack while the
selected zone is turned on.
Source Select this setting to send the voltage signals at
the selected TRIGGER OUT jack while the
selected input source is selected.
Manual Select this setting to send the voltage signals
manually.
Target Zone (Target zone)
Note
This setting is not available when "Trigger Mode" is set to
"Manual".
Choice
Main
Main zone
Zone2 Zone 2
Zone3 Zone 3
Zone4 Zone 4
All Main zone, Zone 2, Zone 3 and Zone 4
Input Level (Input level)
Select the input source and then set the input level applied
to the selected input source.
Note
This setting is available only when "Trigger Mode" is set to
"Source".
Choice
High Sends the voltage when the input source is
selected.
Low Stops sending the voltage when the input source
is selected.
Function
Descriptions
Target zone
Descriptions
Graphical user interface (GUI) menu
Manual Test (Manual test)
Note
This setting is available only when "Trigger Mode" is set to
"Manual".
Choice
High Sends the voltage signals.
Low Stops sending the voltage signals.

Language

Use this feature to select the language of the menu items
and messages.
Choices: (English),
English
Français (French), Deutsch (German),
Español (Spanish), Русский (Russian)
y
You can also select the display language with the
"LANGUAGE" parameter in "ADVANCED SETUP"
(page 132).
Language GUI menu
Русский
(Russian)
(Japanese)
Other
languages
··· The selected language is displayed.
— ··· The selected language is not displayed. The menu
items and messages are displayed in English.
Functions
(Japanese),
Front panel
Zone OSD
display
—
— —
107
En