Simplified Remote Control - Yamaha RX RX-Z7 Owner's Manual

Yamaha av receiver owner's manual
Hide thumbs Also See for RX RX-Z7:
Table of Contents

Advertisement

Simplified remote control

Use the supplied simplified remote control to make basic controls of this unit.
STANDBY
Sets the selected zone to the
standby mode.
☞ P. 31, 127
SYSTEM MEMORY
Save or recall the system
settings.
☞ P. 108
These buttons function as
well as the following
identical buttons on the
main remote control (when
the operation selector mode
is set to FAMP).
8STATUS
9k / n / l / h
9ENTER
0RETURN, SUBMENU
IMENU
KDISPLAY
■ Setting the controlling zone of the
simplified remote control
Use this feature to set the controlling zone (page 127) and
remote control ID (page 130) of the simplified remote
control.
Setting the remote control ID
• ID1: Press and hold l (left cursor) and 1 for 3
seconds.
• ID2: Press and hold l (left cursor) and 2 for 3
seconds.
Setting the controlling zone
• Main zone: Press and hold h (right cursor) and 1 for 3
seconds.
• Zone 2: Press and hold h (right cursor) and 2 for 3
seconds.
• Zone 3: Press and hold h (right cursor) and 3 for 3
seconds.
• Zone 4: Press and hold h (right cursor) and 4 for 3
seconds.
■ Replacing the battery in the simplified
remote control
STANDBY
POWER
SYSTEM MEMORY
1
2
3
4
INPUT
VOLUME
STATUS
MENU
ENTER
RETURN
DISPLAY
SUBMENU
MUTE
Remove the insulation sheet before using the remote
control.
Change the battery when the operation range of the
simplified remote control decreases.
Use a straight
pin to remove
the cover.
Notes
• Insert the battery according to the polarity markings
(+ and –).
• If the batteries run out, immediately remove them from the
simplified remote control to prevent an explosion or acid leak.
• If a battery starts leaking, dispose of it immediately. Be careful
not to let the leaking battery acid touch your skin or clothing.
• Before inserting new batteries, wipe the compartment clean.
• Dispose of batteries according to your regional regulations.
Remote control features
POWER
Turn on the power.
☞ P. 31, 127
INPUTl / h
Select the input source.
☞ P. 42
VOLUME +/–
Adjust the volume level.
☞ P. 42
MUTE
Mutes the audio output.
☞ P. 44
Replace the
Close the
battery with a
cover.
new CR2025
battery.
123
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-z7bl

Table of Contents