Stereo/Surround - Yamaha RX RX-Z7 Owner's Manual

Yamaha av receiver owner's manual
Hide thumbs Also See for RX RX-Z7:
Table of Contents

Advertisement

Stereo/Surround

You can enjoy good quality sound with the initial factory
settings. Although you do not have to change the initial
factory settings, you can change some of the parameters to
better suit the input source or your listening room.
y
To customize the program parameter settings, press
0SUBMENU to turn on the submenu after you select the
desired program.
■ Basic configuration of sound field
programs
Each sound field program has some parameters defining
the characteristics of the program. To customize the
selected sound field program, adjust "DSP Level" and/or
"Dialogue Lift" first, and then try other parameters.
Adjusting the effect sound level of the sound
field programs (DSP Level)
Sound field programs add effect sounds (DSP effect
sounds) to the original source sound to create sound field
in the listening room. Use the "DSP Level" parameter to
adjust the level of the effect sounds.
The DSP effect
sound level is low
Adjust "DSP Level" as follows:
Increase the value of "DSP Level" when
• the effect sound of the selected sound field
program is too weak.
• you cannot recognize any difference between the
sound field programs.
Decrease the value of "DSP Level" when
• the sound is vague.
• you feel that the additional sound effect is
excessive.
Control range: –6 dB to +3 dB
Adjusting the vertical dialogue position
(Dialogue Lift)
Use this feature to adjust the vertical position of the
dialogues in movies. The ideal position of the dialogues is
at the center of the video monitor screen.
The DSP effect sound
level is high
Graphical user interface (GUI) menu
If the dialogues are heard at the lower position of the video
monitor screen, increase the value of "Dialogue Lift".
Move up to the ideal dialogue position
Choices: 0, 1, 2, 3, 4, 5
"0" (initial setting) is the lowest position, and "5" is the
highest position.
Notes
• "Dialogue Lift" is available when "Front Presence" is set to
"Yes" (page 93) and headphones are not connected.
• You cannot move the dialogue position down from the initial
dialogue position.
The ideal
dialogue
position
85
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-z7bl

Table of Contents