Operation Modes Of Front Panel Controls - Yamaha RX RX-Z7 Owner's Manual

OPERATION MODES OF FRONT PANEL CONTROLS

Operation modes of front panel controls
If you perform a mode trigger operation using the front panel controls, this unit enters the following mode. In each mode,
you can use the front panel controls as shown below. If no operation is performed for five seconds in each mode, this unit
automatically returns to the default mode.
Mode trigger button
—
Press CAUDIO SELECT/REC OUT
Press and hold CAUDIO SELECT/REC OUT
Press CMENU
Press CTONE CONTROL
Press and hold DENTER
Available operations in each mode
CAUDIO
Mode SELECT/REC
Default to Audio select mode
Audio select to default mode
Rec out
to default mode
GUI menu
Left cursor
Tone control/
to Audio select mode
speaker level
BT pairing*
Note
* In the BT pairing mode, this unit searches for Bluetooth components to be paired. This mode is available only when "DOCK" is
selected as an input source and a Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) is connected to the
DOCK terminal of this unit.
148
En
Default mode
Audio select mode
Rec out mode
GUI menu mode
Tone control/speaker level mode
BT pairing mode
CMENU
OUT
to GUI menu mode
to GUI menu mode
to GUI menu mode
to default mode
to GUI menu mode
to GUI menu mode
— (the pairing process
continues)
Mode to enter
CTONE
DENTER
CONTROL
to Tone control/
speaker level mode
to Tone control/
speaker level mode
to Tone control/
speaker level mode
Confirm the
Right cursor selection in the GUI
menu (page 84)
Select a parameter Select a speaker for
for adjustment level adjustment
(page 54) (page 55)
to default mode (the
— pairing process
continues)
MPROGRAM
selector
Select a sound field
—
programs (page 46)
Select an audio input
—
jack (page 43)
Select a recording
—
source (page 55)
Menu up/down
Adjust parameters
Select a sound field
program