Setting The Sirius Satellite Radio™ Preset Channels - Yamaha RX RX-Z7 Owner's Manual

SIRIUS Satellite Radio™ tuning
Before performing the following operations, set the operation
mode selector on the remote control to FSOURCE and then
press 3SIRIUS.
Setting the SIRIUS Satellite
Radio™ preset channels
You can use this feature to store up to 40 SIRIUS Satellite
Radio channels (A1 to E8: 8 preset channel numbers in
each of the 5 preset channel groups). You can then recall
any preset channel easily by selecting the preset channel
group and number as described in "Preset Search mode"
(page 67).
1
Search for a channel you want to set as a
preset channel by using one of the SIRIUS
Satellite Radio search modes.
For details, see "SIRIUS Satellite Radio™
operations" (page 66).
0 0 1 S I R I U S H i t
Channel number
2
Press FMEMORY (or 0MEMORY).
The PRESET indicator lights up in the front panel
and this unit automatically selects an empty preset
number.
Lights up
M E M O R Y A 1
PRESET
0 0 1 S I R I U S H I T
y
• To store the selected channel under an empty preset
number automatically, press and hold FMEMORY (or
0MEMORY) for more than 2 seconds instead of step 2.
In this case, the following steps are unnecessary.
• To cancel the preset operation, press FMEMORY (or
0MEMORY) again.
3
To select the preset channel group and
number (A1 to E8), press EPRESET/
TUNING/CH l / h (or 9CAT./A-E l / h
and 9PRESET/CH k / n) repeatedly.
• To select a higher preset channel group and
number, press Eh (or 9k).
• To select a lower preset channel group and number,
press El (or 9n).
68
En
y
• You can also select a preset number (1 to 8) by pressing
the numeric buttons (B).
• If you select a preset number being used ("*" appears next
to the preset number), the current preset channel will be
overwritten.
4
Press DENTER (or 9ENTER).
The preset channel is set and the PRESET indicator
disappears.
■ Clearing preset channels
You can clear the assignments of preset SIRIUS Satellite
Radio channels.
1
Select the preset SIRIUS Satellite Radio
channel to clear.
For details, see "Preset Search mode" (page 67).
Press and hold GSEARCH MODE (or
2
ISRCH MODE) until "CLEAR?" appears in
the front panel display.
3
Press DENTER (or 9ENTER) to clear the
preset channel.
To cancel the operation, press HSEARCH MODE
(or ISRCH MODE).