Yamaha RX RX-Z7 Owner's Manual page 121

■ Programming macro operations
You can program your own macro to transmit several
remote control commands in sequence at the press of a
button. Be sure to set up remote control codes or perform
learning operations before programming the macro.
Notes
• The default macro is not cleared when a new macro is
programmed for a button. The default macro can be used again
when the programmed macro is cleared.
• It is not possible to add a new signal (macro step) to the default
macro. Programming a macro changes all macro contents.
• We do not recommend that you program continuous operations
(for example, volume control) in a macro.
1
Press GSETUP using a ballpoint pen or
similar object.
"SETUP" appears in the display window (4).
2
Press 9k / n repeatedly to select "MACRO"
and then press 9ENTER.
3
Press the desired macro button you want to
assign the macro program to and then press
9ENTER.
"M:the three-letter name of the selected macro
button" (for example, "M:DVD") and the name of the
currently selected control area appears in the display
window (4) alternately.
When you press DSTANDBY or EPOWER,
"M:STB" or "M:PWR" and the name of the currently
selected control area appears in the display window
(4) alternately.
4
Press the buttons for the functions you want
to include in the macro operation in
sequence.
Example
Set the input source to DVD
→
player Turn on the video monitor
Step 1 ("MCR1"): Press DVD.
Step 2 ("MCR2"): Press AV POWER.
Step 3 ("MCR3"): Press TV POWER.
POWER POWER
TV AV
3
MULTI V-AUX
BD
DVD
HD DVD
CBL
TV
SAT
TUNER XM
Indicates the number of macro
MCR 1
steps entered
M:DVD
(Selected macro button)
Flashes alternately so you can set the
next step
DVD
(Selected control area)
Notes
To change the selected input area, press 5 SELECT l
•
Pressing the input selector buttons will program a macro step,
whereas 5 SELECT l
/ h
• The position of the operation mode selector (AMP/TV/
SOURCE) affects the assigned function. When the
operation mode selector is set to FAMP or FTV, the
input source selectors do not function.
5
Press HMACRO to confirm the program.
You can set up to 10 steps (10 functions). After you
have set 10 steps, "FULL" appears and the remote
control automatically exits from the macro
programming mode.
6
Press GSETUP again to exit from the setup
menu.
Note
"ERROR" appears in the display window (4) if you press more
than one button simultaneously.
Remote control features
→
Turn on the DVD
STANDBY POWER
2
PHONO DOCK
MD
CD
CD-R
1
DVR VCR
USB
SIRIUS
NET
/ h
.
only changes the selected input area.
121
En