Operation Modes Of Front Panel Controls - Yamaha RX-V3900 Owner's Manual

Operation modes of front panel controls

If you perform a mode trigger operation using the front panel controls, this unit enters the following mode. In each mode,
you can use the front panel controls as shown below. If no operation is performed for five seconds in each mode, this unit
automatically returns to the default mode.
Mode trigger button
—
Press DAUDIO SELECT/REC OUT.
Press and hold
DAUDIO SELECT/REC OUT.
Press DMENU.
Press DTONE CONTROL.
Press and hold EENTER.
Available operations in each mode
DAUDIO
Mode SELECT/REC
Default
to Audio select mode
Audio select
to default mode
Rec out
to default mode
GUI menu
Left cursor
Tone control/
to Audio select mode
speaker level
BT pairing*
Note
* In the BT pairing mode, this unit searches for Bluetooth components to be paired. This mode is available only when "DOCK" is
selected as an input source and a Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) is connected to the
DOCK terminal of this unit.
Default mode
Audio select mode
Rec out mode
GUI menu mode
Tone control/speaker level mode
BT pairing mode
DMENU
OUT
to GUI menu mode
to GUI menu mode
to GUI menu mode
to default mode
to GUI menu mode
to GUI menu mode
— (the pairing process
continues)
OPERATION MODES OF FRONT PANEL CONTROLS
Mode to enter
DTONE
EENTER
CONTROL
to Tone control/
speaker level mode
to Tone control/
speaker level mode
to Tone control/
speaker level mode
Confirm the
Right cursor selection in the GUI
menu (page 68)
Select a parameter Select a speaker for
for adjustment level adjustment
(page 47) (page 47)
to default mode (the
— pairing process
continues)
MPROGRAM
selector
Select a sound field
—
programs (page 40)
Select an audio input
—
jack (page 37)
Select a recording
—
source (page 47)
Menu up/down
Adjust parameters
Select a sound field
program
125
En