Table of Contents
Advertisement
1. Product Outline
Switch-S24GPWR is a Layer-2 Ethernet Switching Hub with management func-
tions, equipped with 24 10BASE-T/100BASE-TX/1000BASE-T (auto-negotiation)
twisted pair ports supporting IEEE802.3af-compatible PoE power supply function.
1.1. Features
* This Switching Hub can supply power conforming with IEEE802.3af. Supplying
power up to 15.4 W per port, and up to 124 W in total is possible.
* By factory default, ports 1 to 22 are fixed to MDI-X to prevent loop failures.
* The Loop detection and blocking function can prevent a loop failure by auto-
matically blocking a port when a loop occurs.
* The Loop History function allows to identify the looping port by referring to the
loop event notification on the LED and the occurrence history on the configura-
tion screen.
* The ECO mode LED function can save more power consumption by turning off
the LEDs on the Switching Hub.
* All twisted pair ports support the MDI/MDI-X cable auto sensing function. You
can simply connect devices with a straight cable, whether the target is a termi-
nal or a network device. (This function does not work if the port communica-
tion configuration is set to Fixed or Trunking. By factory default, ports 1 to 22
are fixed to MDI-X.)
* The Switching Hub supports auto-negotiation to easily accommodate an envi-
ronment where 10BASE-T, 100BASE-TX, and 1000BASE-T coexist. In addition,
speed and communication modes can be set to Fixed.
* The MNO series power saving mode detects the connection status automati-
cally, and reduces power consumption to a minimum.
* PoE settings can be remotely enabled or disabled for each port (Ports 1 to 24).
* The Ping command can be used to verify communications.
* The IEEE802.1Q compatible tag VLAN is supported, allowing registration of up
to 256 VLANs.
* The IEEE802.1p compatible QoS function is supported.
* The Reboot timer function is supported, allowing to automatically reboot the
Switching Hub after the specified time (within 24 hours.)
* The PoE scheduler function enables scheduling of PoE power supply control.
10
Advertisement
Table of Contents
