Table of Contents
Advertisement
4.3.8.e.
Addition Or Deletion Of MAC Address
On the Forwarding Database Information Menu, pressing "S" opens the Static
Address Table Menu screen, as shown in Fig. 4-10. On this screen, you can add or
delete MAC addresses statically.
PN25249 Local Management System
Forwarding Database Menu -> Static Address Table Menu
MAC Address
-----------------
Database is empty!
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
[A]dd New Entry
Command>
Enter the character in square brackets to select option
Screen Description
MAC Address
Port
VLAN ID
Available commands are listed below.
N
Display the next page.
Press "N" to display the next page.
P
Display the previous page.
Press "P" to display the previous page.
A
Execute additional registration of MAC address.
Press "A." The command prompt changes to "Enter MAC Address(xx:xx:xx:xx:xx:xx)." Enter a
MAC address to be added.
D
Delete a MAC address that has been registered.
Press "D." The command prompt changes to "Enter MAC Address(xx:xx:xx:xx:xx:xx)." Enter a
MAC address to be deleted.
Q
Return to the parent menu.
Port
VLAN ID
------
-------
Fig. 4-10 Addition Or Deletion Of MAC Address
Displays all the entries in the MAC address table.
Displays the port to which the MAC address belongs.
Displays the VLAN ID to which the MAC address belongs.
[D]elete Entry
[Q]uit to previous menu
60
Advertisement
Table of Contents
