Table of Contents
Advertisement
Available commands are listed below.
N
Display the next page.
Press "N" to display the next page.
P
Display the previous page.
Press "P" to display the previous page.
V
Configure the PVID settings.
1. Press "V." The command prompt changes to "Enter port number>." Enter the port num-
ber you wish to configure.
2. Then, the command prompt changes to "Enter PVID for port #>." Enter the VLAN ID you
wish to modify among the VLAN IDs already configured.
F
Set the type of packets to be received.
1. Press "F." The command prompt changes to "Enter port number>." Enter the port num-
ber you wish to configure.
2. Then, the command prompt changes to "Select port acceptable frame type (A/T)>."
Enter "A" to receive all the frames or "T" to receive only the tagged frames.
Q
Return to the parent menu.
Note:
This Switching Hub can assign multiple VLANs to one port. When a new VLAN
was configured, it belongs to both VLAN to which it has belonged and the
new VLAN. So, when you divide the domain, make sure to delete it from the
VLAN to which it has belonged.
71
Advertisement
Table of Contents
