5.3. Network Configuration Example and Notes
Using Loop Detection and Blocking Function
Configuration example using the Loop detection and blocking function
Using the Loop detection and blocking function allows to prevent a loop failure
possibly occurring on a downstream Switching Hub that the user directly uses.
If you connect a hub that does not support the Loop detection and blocking func-
tion to a downstream Switching Hub, and a loop failure occurs in the Switching
Hub, the downstream Switching Hub port that caused a loop is blocked to prevent
a loop failure from affecting the entire network.
Upstream Switching Hub
Downstream
Switching Hub 1
PC 1
Figure 5-1 Configuration example using the Loop detection and blocking function
Hub not support-
ing Loop detec-
tion and blocking
function
PC 2
127
Downstream
Switching Hub 2
PC 3