Table of Contents
Advertisement
4.2.2.
System IP Address Configuration
On the Basic Switch Configuration Menu, pressing "I" opens the System IP Config-
uration Menu screen, as shown in Fig. 4-10. On this screen, you can set IP address
related settings for this Switching Hub.
PN25249 Local Management System
Basic Switch Configuration -> System IP Configuration Menu
MAC Address:
IP Address:
Subnet Mask:
Default Gateway:
-------------------------------- <COMMAND> -----------------------------------
Set [I]P Address
Set Subnet [M]ask
Set Default [G]ateway
Set IP P[a]rameter
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
MAC Address
Displays the MAC address of this Switching Hub. This value is uniquely assigned to
each device and cannot be changed.
IP Address
Displays the current IP address. "0.0.0.0" is the factory default setting.
Subnet Mask
Displays the current subnet mask. "0.0.0.0" is the factory default setting.
Default Gate-
Displays the IP address of the router, set as a current default gateway. "0.0.0.0" is
way
the factory default setting.
xx:xx:xx:xx:xx:xx
192.168.0.1
255.255.255.0
0.0.0.0
Fig. 4-10 System IP Address Configuration
33
Advertisement
Table of Contents
