4.3.3.
Port Configuration Extend
On the Basic Switch Configuration Menu, pressing "e" opens the Port Configura-
tion Extend Menu screen, as shown in Fig. 4-13. On this screen, you can configure
port status display settings and extended port settings.
PN25249 Local Management System
Basic Switch Configuration -> Port Configuration Extend Menu
Port Trunk
---- ----- ----------- ---- ---------------
1
---
2
---
3
---
4
---
5
---
6
---
7
---
8
---
9
---
10
---
11
---
12
---
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
Port
Displays the port number.
Trunk
Displays the group number for a trunked port.
Type
Displays the port type.
100TX
1000T
Link
Displays the current link status.
Up
Down
Port Name
Displays the port name.
Available commands are listed below.
N
Display the next page.
Press "N" to display the next page.
P
Display the previous page.
Press "P" to display the previous page.
Type
Link
Port Name
1000T
Down Port_1
1000T
Down Port_2
1000T
Down Port_3
1000T
Down Port_4
1000T
Down Port_5
1000T
Down Port_6
1000T
Down Port_7
1000T
Down Port_8
1000T
Down Port_9
1000T
Down Port_10
1000T
Down Port_11
1000T
Down Port_12
Fig. 4-13 Port Configuration Extend Menu
The port type is 10/100BASE-TX.
The port type is 10/100/1000BASE-T.
A link has been established successfully.
A link has not been established.
Set Port N[a]me
40