Table of Contents
Advertisement
4.3.8.c.
Display oF All MAC Addresses
On the Forwarding Database Information Menu, pressing "M" opens the Display
MAC Address by MAC screen, as shown in Fig. 4-8. On this screen, you can display
all the MAC address tables in this Switching Hub.
PN25249 Local Management System
Forwarding Database Menu -> Display MAC Address by MAC
Age-Out Time: 300 Sec.
MAC Address
-----------------
xx:xx:xx:xx:xx:xx
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Command>
Enter the character in square brackets to select option
Screen Description
Age-Out Time:
Displays the time to store the MAC address table. It is equal to the time after
receiving the last packet. The factory default setting is 300 seconds (5 minutes).
MAC Address
Displays all the entries in the MAC address table.
Port
Displays the port to which the MAC address has been assigned.
Available commands are listed below.
N
Display the next page.
Press "N" to display the next page.
P
Display the previous page.
Press "P" to display the previous page.
A
Set the time to store the MAC address.
Press "A." The command prompt changes to "Enter Age-Out time>." Enter the age-out time
with a value of 10 to 1000000 (seconds).
Q
Return to the parent menu.
Port
----
CPU
Fig. 4-8 Display oF All MAC Addresses
58
Set [A]ge-Out Time
[Q]uit to previous menu
Advertisement
Table of Contents
