Instrument Options; Device Information; Computer Interface - Abbott PLEX-ID SP User Manual

Instrument

Device information

Computer interface

Abbott Laboratories
This section describes the instrument parameters. All these parameters
are set in the Maintenance menu. The values shown in the
options
Maintenance menu remain in the instrument memory and are
instrument specific, not protocol specific.
The device information shows the name of the instrument, the internal
software version and the serial number of the instrument unit.
Go to the Maintenance menu.
Press
OK
Press
OK
There are two types of computer interfaces available: RS-232 and USB.
The instrument will automatically connect to the interface that is first
used after the power is switched on.
Go to the Maintenance menu. Select the Computer interface row.
.
to exit.
Routine Operation

Instrument options

PLEX-ID SP User Manual 10/2009 N09455 47