Routine Operation
Using internal software
Using internal
software
protocols
Selecting the protocol
44
PLEX-ID SP User Manual 10/2009 N09455
This section describes procedures related to the PLEX-ID SP internal
software.
Factory
This section describes the factory protocols. They are found in the
Factory protocols menu. Factory protocols are protocols which are
preloaded into the instrument internal memory in the factory. The
factory protocols will be installed by an Abbott Molecular service
representative.
Go to the Factory protocols menu. Select, for example, the IVD row.
Press
OK
Use the Up and Down arrow keys to select the protocol.
Press
START
Press
OK
.
to run the protocol.
to see the protocol details.
Abbott Laboratories