Figure 3-17. Shield Plate Prior To Fitting; Figure 3-18. Inserting The Shield Plate - Abbott PLEX-ID SP User Manual

Abbott Laboratories
Figure 3–17. Shield plate prior to fitting
3. First insert the shield plate into its slot (Figure 3–18).
Figure 3–18. Inserting the shield plate
4. When fastening the two plate retaining screws (Figure 3–19), be
careful not to drop them inside the instrument. Figure 3–20 shows
the shield plate installed.
Installation setups
PLEX-ID SP User Manual 10/2009 N09455
Installation
31