Figure 4-36. Combining The Tip Comb And Plate (A); Figure 4-37. Combining The Tip Comb And Plate (B) - Abbott PLEX-ID SP User Manual

Routine Operation
How to start
54 PLEX-ID SP User Manual 10/2009 N09455
Figure 4–36. Combining the tip comb and plate (A)
Loading postion,
plate station 4
Figure 4–37. Combining the tip comb and plate (B)
The loading position, that is, plate station 4, is labeled. The eight plate
stations and the A1 positions of the eight plate stations are clearly
marked on the turntable. When the instrument is in its basic position,
plate station 1 is under the magnet head. After the protocol has been
run, note that the turntable may stop in a different position than the
basic position.
Plate station 1
Abbott Laboratories