Safety Specifications; In Conformity With The Requirements - Abbott PLEX-ID SP User Manual

Technical Specifications

Safety specifications

specifications
In conformity
requirements
70 PLEX-ID SP User Manual 10/2009 N09455
Cont.
Performance specifications
the particles (indoor use)
Magnetic particle size
Magnet rods
Plate types (disposable)
* Recommended filling
volume
Tip combs (polypropylene
– disposable)
Heating block
temperature
Heating block accuracy
Keyboard / Display
Safety
This section describes the safety specifications for the PLEX-ID SP
instrument.
PLEX-ID SP bears the following markings:
with the
Type 711
100 – 240 Vac, 50/60 Hz, 150 VA
CE mark
CSA marking
PLEX-ID SP conforms to the following requirements:
2006/95/EC (Low Voltage Directive)
2004/108/EC (Electromagnetic Compatibility Directive, EMC)
FCC Part 15, Subpart B/Class B (July 2004)
2002/96/EC (Waste of Electrical and Electronic Equipment)
Safety performance:
EN 61010-1:2001 (Ed. 2),
including US and CA National differences
EN 61010-2-010:2003 (Ed. 2)
EN 61010-2-101:2002 Particular Requirements for In Vitro Diagnostic (IVD) Medical
Equipment
2.8 µm particles, 3 collections, RT
ca. > 1 µm
24 or 96 in one frame
Interchangeable magnet heads
24 / 96-well plates:
– 24 Deep Well plate (200 µl – 5 mL*)
– 96 Deep Well plate (50 – 1000 µl*)
24 / 96 in one frame
– for 24 Deep Well plate
– for 96 Deep Well plate
From +5°C above ambient temperature to +115°C
± 1°C, up to +80°C, ± 2°C, up to +115°C, instrument in RT
/ / /
START PAUSE STOP OK
TURNTABLE ROTATING COUNTERCLOCKWISE
/
TURNTABLE ROTATING CLOCKWISE
/ four arrow keys / LCD
Abbott Laboratories
/