How To Start; Figure 4-35. 24 Deep Well Tip Comb Package - Abbott PLEX-ID SP User Manual

How to start

Abbott Laboratories
Figure 4–35. 24 Deep Well Tip Comb package
2. Before you take the tip comb into use, press the tip comb evenly
against the enclosed 24 Deep Well plate with the aid of a magnet
head or another object.
To start the instrument, follow these steps:
1. Select a protocol by using the arrow keys and press
2. Open the sliding door if the see-through lid is in place (Figure 2–3).
3. Load the plates in the order that the protocol requests (Figure 4–38
through Figure 4–40). Place the A1 well of the plate so that it is in
the upper right corner. The first A1 row is consequently always in
the inner circle. Once you have loaded the requested plates into the
plate stations, press
manually onto a plate (Figure 4–36 through Figure 4–38). The
instrument also functions with either one plate or up to eight plates
depending on the number of steps. Only one tip comb is placed
onto a plate (= tip-plate) per run (Figure 4–37). Confirm the plate
loading by pressing
. The tip comb always has to be placed
START
.
START
PLEX-ID SP User Manual 10/2009 N09455
Routine Operation
How to start
.
START
53