Interchangeable Magnet Heads; Figure 3-19. Fastening / Loosening The Shield Plate; Figure 3-20. Shield Plate Fitted - Abbott PLEX-ID SP User Manual

Installation
Installation setups
Interchangeable magnet
32 PLEX-ID SP User Manual 10/2009 N09455
Figure 3–19. Fastening / loosening the shield plate
Figure 3–20. Shield plate fitted
There are two kinds of interchangeable magnet heads available, for 24
Deep Well plates and 96 Deep Well plates. The magnet heads all have
heads
corresponding disposable plastic tip combs (Table 3–2).
Caution Do not place the magnet heads on top of the instrument or
any metal surfaces.
Keep the magnet heads always in their respective plastic boxes when not
in use.
It is very important to keep the magnet heads away from each other and
other magnets at all times. Clashing of the magnets together may cause
serious damage to the magnets. ▲
Abbott Laboratories