Selecting The Printout Function - Sartorius LA Reference Series Operating Instructions Manual

Selecting the Printout Function (

Purpose
This menu item enables you to config-
ure the printout to meet your individual
requirements by selecting predefined
menu parameters in the Setup menu.
Printouts of weights and other meas-
ured or calculated values and IDs enable
you to document your data. You can
select the particular data you wish to
print. To prevent changes to your set-
tings, you can block access to the menu
by assigning a password.
Features
The device parameters are combined in
the following groups (1st menu level):
– Application-defined output
– Configured printout
– FlexPrint
– Automatic output of displayed values
– Output to interface port
– Line format
– ISO/GLP/GMP printout
– Identification (identifier)
– Factory settings – printout only
Factory Settings
Parameters: The factory settings are
identified by the symbol "ο" in the list
on the next page.
30
PRINTOUT
Preparation
Display available printout parameters
§ Select the Setup menu: press o
> SETUP is displayed:
§ Select "Printout": use the q and O soft
keys
If no password has been assigned, any-
one can access the printout parameters
in the Setup menu
If a password has already been assigned:
> The password prompt is displayed
$ If access is blocked by a password:
enter the password using the numeric
and/or alphabetic keys
$ If the last character of the password
is a letter: conclude input by pressing
the a key
§ Press l to confirm the password
> Printout parameters are now displayed:
$ To select the next group: press the q
soft key (down arrow)
$ To select the previous item of a group:
press the Q soft key (up arrow)
$ To select the next sub-item within
a group: press the O soft key (right
arrow)
$ To select the previous group: press the
o soft key (left arrow)
$ To confirm: press the l soft key
)
Extra Functions
§ Exit the Setup menu: press the oo soft
key
> Restart your application
§ Print parameter settings:
– When the printout parameters are
displayed, press r
> Printout (Example)
SETUP
PRINTOUT
--------------------
Application defined
Stability paramete
With Stability
Print on request t
Auto print upon in
All values
Configured printou
Indiv.: Printout
Comp.: Printout
Total: Printout
FlexPrint
Automatic Output of
Stability paramet
Without stabili
Stop auto print
Not possible
Time-dependent aut
1 display update
Output to interface
Serial communicat:
Application-defined
output
Line format
For other apps/GLP
(22 characters)
ISO/GLP/GMP printou
Identification
Lot (L ID):
ID1:
etc.
Off
Off
Off
ID1