Time-Controlled Functions - Sartorius LA Reference Series Operating Instructions Manual

Time-Controlled Functions

Purpose
With this application program, you
can configure the balance to perform
certain functions (e.g., automatic print-
out of values, store value in totalization
memory) at a given time or after a set
interval.
You can use the "Time-Controlled
Functions" application in combination
with a program chosen from Application
1 (e.g., counting, weighing in percent)
and one from Application 3
(e.g., totalizing, formulation).
Available Features
– Time-controlled activation of balance
functions:
– one time only, at a given time
Setting=
( is displayed in the
text line)
– repeatedly, at given intervals
Interval=
( is displayed in the
text line before the function is start-
ed, and
Repeat=
is displayed after the
function is started)
Functions that can be time-controlled
include:
– Acoustic signal
– Lock in readout
– Automatic printout of values
– Store values for totalizing,
formulation or statistics
– Print time in addition to weight value
– Store value independent of stability
– Tare the balance after printout of
weight values
– Press the corresponding soft key to
cancel time-controlled functions
84
K
Factory Settings
Function after time interval:
Automatic printout of
values
On
Automatic function restart:
Storage mode:
Without stability
On
Print then tare:
Preparation
Turn on the balance: Press e
> Sartorius logo is displayed
Select the "Time-controlled functions" application in the Setup menu:
Press o
Application parameters
Select the
then the soft key
O
Application 2 (control functions)
Select
press the soft key, then the
q
Time-controlled functions
Select
Time-controlled functions
Confirm
Time-controlled Function after
functions time interval
Automatic
function restart
Storage mode
Print then tare
ο = factory setting
see also the "Application Parameters (Overview)" in the chapter entitled
"Configuration"
Save settings and exit the Setup menu: press the
Print Net Values without Printout of Time
Select the Setup menu:
Setup: Printout: Application-defined output: Auto print upon initialization: Off
Soft Key Functions
Stop
Stop the application
Quit
Confirm performed function
(e.g., "Lock in readout" or
"Beep")
Interv
Store input interval for time-
controlled functions
Set.
Store input time for one-time
performance of function
: press the
soft key
O
: press the
: press the
Beep
Lock in readout
ο Automatic printout of values
Store value in applicat. 3 memory
ο On
Off
ο Without stability
After stability
After higher stability
Off
ο On
soft key
oo
key 2 +,
q
:
or soft key
Q q
soft key
O