Operating The Balance/Scale; Basic Weighing Function - Sartorius Basiclite Installation And Operating Instructions Manual

Operating the Balance/Scale

Basic Weighing Function

Available Features
– Taring the balance/scale
You can tare the balance/scale within the entire weighing range.
Preparation
§ Turn on the balance/scale: Press e
§ To change configurations:
See the chapter entitled "Configuring the Balance/Scale"
§ To load factory-set configurations:
See "Configuring the Balance/Scale," parameter 9 – 1
$ To tare the balance/scale: Press t
Additional Functions:
§ To turn off the balance/scale: Press e
Warmup Time
$ Before connecting the balance/scale to the line current for the first time, allow
it to warm up for at least 24 hours. Do not use the balance/scale until it has
reached the proper operating temperature.
$ BL210S, BL120S, BL60S, GC503:
Whenever the balance/sacle is disconnected from the line current, allow it to
warm up for at least 10 minutes. Once the balance/scale has warmed up
completely, adjust it with the weight supplied.
Example
Basic weighing
Menu code settings: Factory-set codes
Step
1. Turn on the balance/scale
> Self-test is performed
3. Place container on balance
scale (here: 52 g)
4. Tare the balance/scale
5. Place sample in container on
balance/scale (here: 150.2 g)
Key
(or instruction)
e
t
Display
+
52.0
g
0.0
g
+ 150.2
g
9