Editing A Performance - Yamaha MOTIF ES Owner's Manual

Loading Voice data from the SmartMedia/USB
storage device
[FILE] [F3] LOAD
In the previous section, we saved Voice data as an "All Voice"
file to a SmartMedia card or USB storage device. Here, we'll
recall that Voice data and load it to the instrument with the
Load operation.
Press the [FILE] button to enter the File mode,
1
then execute the basic settings.
Refer to "Basic settings for using SmartMedia or a USB
storage device" on page 30.
Press the [F3] LOAD button to call up the Load
2
display.
3
Select the file type to be loaded.
The file saved in operation explained on the previous page
has all the User Voices. If you wish to load all the User Voices,
set Type to "All Voice." If you wish to load only a specific
voice, set Type to "Voice."
4
Select a file ( ) to be loaded.
Move the cursor to the file (extension: W7V) saved in the
operation explained on the previous page. If you've set the
Type to "AllVoice" in step #3, go to step #5. If you've set the
Type to "Voice" in step #3, execute the operations in the
following box, then go to step #5.

Editing a Performance

The Performance Edit mode ([PERFORM]
different Parts (Voices) — by editing the various parameters. The Voices can be selected from the internal tone generator or the
installed Plug-in Boards. After assigning different Voices to separate ranges of the keyboard, edit the detailed parameters in the
Performance Edit mode.
Press the [PERFORM] button to enter the
1
Performance mode, then select a Performance to
be edited.
VOICE PERFORM
[EDIT]) lets you create your own original Performances — containing up to four
MODE
MASTER
When Type is set to "Voice":
When Type is set to "Voice," you can specify and load a
specific Voice from a file (with the extension W7V or
W7A).
Move the cursor to the file (extension: W7V) saved
in the operation explained on the previous page.
ENTER
EXECUTE
All the Voices contained in the selected file are listed
on the display. Move the cursor to the desired Voice.
ENTER
EXECUTE
Select the desired Voice to be loaded.
Select the destination Voice Bank/Number.
CAUTION
Loading data to this synthesizer automatically erases and replaces
any existing data in the User memory. Make sure to save any
important data to a SmartMedia/USB storage device before
performing any Load operations.
Press the [ENTER] button to execute the Load
5
operation.
After the data has been loaded, a "Completed" message
appears and operation returns to the original display.
CAUTION
While the data is being saved, make sure to follow these precautions:
• Never remove or eject the media from the device (SmartMedia or USB storage).
• Never unplug or disconnect any of the devices.
• Never turn off the power of the MOTIF ES or the relevant devices.
Press the [EDIT] button to enter the Performance
2
Edit mode.
EDIT
COMPARE
Editing a Performance
JOB STORE
SCENE STORE
SET LOCATE
Owner's Manual
87