Table of Contents
Advertisement
Record
ord mode
Recording with SE!quencer is a very quick and
easy process. The basic building block of
every SE!quence is the Pattern, which can have
up to 16 Tracks. These Patterns are then used
to make а Song. Songs are created using
SE!quencer's unique Song Record mode that
lets you combine any number of Patterns in
real-time. Both Songs and Patterns can be
stored internally for instant recall whenever you
use your DX7IVDX7s. It's really that simple!
The next few pages show you how:
press button 1
to enter the
Record mode
SEquencer
Recording a Pattern
Record Modi
]
ing
2-Patlem.
ро NOsEx
press NO to exit
The Pattern is the basic building block of SElquencer.
Iniernally, SElquoncer can store up to 32 different
Patterns at once. The Pattern numbers correspond to the
32 patch select butions on your DX (Pattern 1= button 1,
Pattern 2 button 2, eic.)
'A ater can have up to 16 separate Tracks, each of
which can play up to 16 notes at a time. Each Track can
be played by any of the 16 MIDI channels or by the €
—
DX voices in the Octal mode all information.
concerning Track destination, DX volumes, Velocky
Processing etc. are determined by your ENGINE settings.
{See the discussion, "Using the Track Asigr/Voice mode
menus" in бе Stiquencer appendix)
A Patiern can
be from 1 to 64 bars long, and can be set io
most any time signature you need when you initialize it.
(see the next page.) Patterns can also be copied using the
Patem Copy Utility (see the Utility mode chapter.)
To record a Pattern, just follow the examples on the next
few pages:
Advertisement
Table of Contents
