Fader Mode - Yamaha WC42260 Owner's Manual

24
Chapter 2—Control Surface & Rear Panel
D
ASSIGN 1–4 buttons
These buttons are used to select the assignable Encoder modes. The button indicator for the
currently selected mode lights up. When an assignable mode is selected, the function of the
Encoders depends on the assigned parameter. Up to four parameters, from a list of 50, can
be assigned to these four buttons. See "Assigning Parameters to the ENCODER MODE
Assign Buttons" on page 62 for more information.

FADER MODE

A
FADER button
This button selects Fader mode, in which the faders control Input or Output Channel levels,
depending on the currently selected Layer. Its indicator lights up when this mode is selected.
See "Selecting Fader Modes" on page 60 for more information.
B
AUX/MTRX button
This button selects the Aux/Mtrx Fader mode, in which the faders control Aux Send or
Matrix Send levels, depending on the currently selected Layer. Its indicator lights up when
this mode is selected. See "Selecting Fader Modes" on page 60 for more information.
DISPLAY ACCESS
A
DATA button
This button is used to select the Save, Load, and File pages, which are used to save and load
DM2000 data to SmartMedia. See "Saving DM2000 Data to SmartMedia" on page 271 for
more information.
B
DIO button
This button is used to select the following pages: Word Clock Select, Dither, Cascade In,
Cascade Out, Sampling Rate Converter, and Higher Sample Rate Data Transfer Format. See
"Digital I/O & Cascading" on page 66 for more information.
C
SETUP button
This button is used to select the following pages: Preferences 1, Preferences 2, Preferences 3,
MIDI/TO HOST Setup, GPI Setup, Input Port Name, Output Port Name, Time Reference,
Time Signature, Remote Port Setup, and Surround Bus Setup.
D
UTILITY button
This button is used to select the following pages: Oscillator, Channel Status Monitor, Bat-
tery Check, and Operation Lock.
E
REMOTE button
This button is used to select the Remote pages. See "About Remote Layers" on page 253 for
more information.
DM2000 Version 2—Owner's Manual
FADER MODE
FADER AUX/ MTRX
1 2
1 2 3 4
DISPLAY ACCESS
5 DATA DIO SETUP
6
MIDI REMOTE METER
PAIR GROUP INPUT
PATCH
9 J K L
UTILITY 7
8
VIEW
OUTPUT
PATCH