Monitor Section - Yamaha WC42260 Owner's Manual

42
Chapter 2—Control Surface & Rear Panel

MONITOR Section

The various subsections of the MONITOR section are explained below.
MONITOR
DISPLAY
STUDIO
STUDIO
CONTROL STEREO
ROOM
11 12
AUX AUX
SOLO
SOLO CONTRAST
CLEAR
A
MONITOR DISPLAY button
CONTROL ROOM
STEREO
This button is used to select the following pages: Solo Setting, Control Room Setup, Talk-
2TR D1 2TR A1
back Setup, Surround Monitor, Surround Monitor Setup, Surround Monitor Patch, and
Surround Monitor Library. See "Configuring Solo" on page 143, "Control Room Monitor-
2TR D2 2TR A2
ing" on page 158 "Using Talkback & Slate" on page 163, and "Surround Monitoring" on
2TR D3 STEREO
page 160 respectively for more information.
1 2
ASSIGN ASSIGN
B
CONTROL ROOM button
SURROUND
This button selects the Control Room Monitor signal as the Studio Monitor signal source.
BUS
Its indicator lights up when this source is selected. See "Studio Monitoring" on page 159 for
more information.
1 2
ASSIGN ASSIGN
C
STEREO button
This button selects the Stereo Out signal as the Studio Monitor signal source. Its indicator
SURROUND
MONITOR LEVEL
lights up when this source is selected. See "Studio Monitoring" on page 159 for more infor-
MONO DIMMER mation.
D
AUX 11 button
SMALL
This button selects Aux Send #11 as the Studio Monitor signal source. Its indicator lights up
when this source is selected. See "Studio Monitoring" on page 159 for more information.
0 10
CONTROL ROOM LEVEL
TALKBACK
E
AUX 12 button
This button selects Aux Send #12 as the Studio Monitor signal source. Its indicator lights up
SLATE
when this source is selected. See "Studio Monitoring" on page 159 for more information.
TALKBACK
SOLO
A
SOLO indicator
This indicator flashes when one or more Channels are soloed, indicating that the Solo func-
tion is active. See "Soloing Channels" on page 142 for more information.
B
SOLO CONTRAST control
This control is used to set the level balance between soloed Input Channels and the cur-
rently selected CONTROL ROOM source. It has no effect on soloed Output Channels. See
"Soloing Channels" on page 142 for more information.
C
CLEAR button
This button can be used to unsolo all soloed Channels. See "Soloing Channels" on page 142
for more information.
DM2000 Version 2—Owner's Manual
1
MONITOR
DISPLAY
STUDIO
2 3
CONTROL STEREO
ROOM
4 5
11 12
AUX AUX
1
SOLO
2
SOLO CONTRAST
3
CLEAR