Setting Send Levels; Muting Sends; Panning Sends; Flip Mode - Yamaha WC42260 Owner's Manual

Setting Send Levels

Send levels can be set as follows.
Use the AUX SELECT [AUX 1]–[AUX 5] (SEND A–E) buttons to select the
1
sends.
The ENCODER MODE [AUX/MTRX] (SEND LEVEL) button indicator lights up, as does
the button indicator of the selected send.
The levels for the selected send are displayed by the channel strip displays. See "Send Level"
on page 227 for more information.
Use the Encoders to set the send levels.
2
You can view send levels in dB on the channel strip displays by holding down the USER
DEFINED KEYS [13] (ALT/FINE) button while adjusting the Encoders.
Send levels can also be set by using the faders in Flip mode. See "Flip Mode" on page 243 for
more information.

Muting Sends

Sends can be muted as follows.
Press the MATRIX SELECT [MATRIX 2] (SEND MUTE) button.
1
Use the AUX SELECT [AUX 1]–[AUX 5] (SEND A–E) buttons to select the
2
sends.
The ENCODER MODE [AUX/MTRX] (SEND LEVEL) button indicator lights up, as does
the button indicator of the selected send.
Use the Encoder push-switches to mute the sends.
3
When a send is muted, the ring of the corresponding channel strip display flashes.
Sends can also be muted by using the [ON] buttons in Flip mode. See "Flip Mode" on page
243 for more information.

Panning Sends

Only sends assigned to stereo destinations can be panned. Sends can be panned by using the
Encoders in Flip mode. See "Flip Mode" on page 243 for more information.

Flip Mode

In Flip mode, the faders, Encoders, and [ON] buttons can be used to control sends, as
shown in the following table.
Control
Fader
Encoder
[ON] button
1 Press the FADER MODE [FADER] or [AUX/MTRX] button.
The FADER MODE [FADER] and [AUX/MTRX] button indicators flash alternately, and
both the ENCODER MODE [PAN] (PAN) and [AUX/MTRX] (SEND LEVEL) button
indicators light up. The SELECT ASSIGN section of the display shows "FLIP."
Use the AUX SELECT [AUX 1]–[AUX 5] (SEND A–E) buttons to select the
2
sends.
The button indicator of the selected send lights up.
Normal mode
Channel level
Channel pan/send level
Channel mute
Setting Send Levels
Flip mode
Send level
Send pan
Send mute
DM2000 Version 2—Owner's Manual
243