Yamaha WC42260 Owner's Manual page 236

Digital production console version 2
Table of Contents

Advertisement

236
Chapter 19—Pro Tools Remote Layer
Press the [POST] button to audition from the out point of the selected region, continuing
for the specified post-roll time.
Auditioning stops when you press the [STOP] button in the transport section, or when
playback reaches the end of a section.
[PRE] & [POST] buttons
These buttons are used to turn on and off pre-roll and post-roll. While the [AUDITION]
button indicator is lit, they are used for auditioning.
[IN] & [OUT] buttons
These buttons are used to set in and out points during playback. While the [AUDITION]
button indicator is lit, they are used for auditioning.
[RETURN TO ZERO] button
Pressing this button moves the playback cursor to the beginning of the session.
[END] button
Pressing this button moves the playback cursor to the end of the session.
[ONLINE] button
This button is used to take Pro Tools online and offline (same as the Online command in
the Operations menu). Its indicator lights up when Pro Tools is online.
[LOOP] button
This button is used to turn loop playback on and off (same as the Loop Playback command
in the Operations menu). Its indicator lights up when loop playback is on.
[QUICK PUNCH] button
This button is used to turn quick punch on and off (same as the Quick Punch command in
the Operations menu). Its indicator lights up when quick punch is on.
DM2000 Version 2—Owner's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dm 2000 version 2

Table of Contents