Punching In & Out Individual Parameters - Yamaha WC42260 Owner's Manual

Punching In & Out Individual Parameters
During Automix rerecording, channels can be punched in and out by pressing the channel
strip [AUTO] buttons. Individual parameters can be punched in and out as follows.
Parameter Channel
Input
Bus Out, Aux
Send, Matrix
Channel Levels
Send
(faders)
Stereo Out
Group Master
faders
Pan
Input
Surround Pan
Input
EQ (F, Q, G)
All channels
EQ On/Off
Aux send 1–12
Input
Aux send 1–12
Input
mutes
Bus Out, Aux
Matrix send 1–4
Send, Stereo
levels
Out
Bus Out, Aux
Matrix send 1–4
Send, Stereo
mutes
Out
Effect parameters
Effects proces-
(certain
sors 1–8
parameters)
User Defined
Plug-Ins
Plug-Ins 1–8
(parameters 1–4)
Faders
User Defined
Remote Layers
Encoders
1. TOUCH SENSE on Fader Edit page must be TOUCH or LATCH.
2. TOUCH SENSE on Fader Edit page must be TOUCH.
3. Cannot be used to control Stereo Out to Matrix Send levels.
Punching In & Out Individual Parameters
OVER-
Operation
WRITE
Set Layer to input, Fader mode to
Fader
Set Layer to Master, Fader mode
to fader
FADER
Stereo Out fader
Set the Fader mode to Fader; Set
the Group Master in the User
Assignable Layer.
Set Layer to input, Encoder mode
PAN
to Pan
Select Input Layer and assign Sur-
SURR round LFE Level or Surround Pan
Wheel to the Encoders
Turn on Auto EQ Edit In prefer-
ence (see page 277). Use
EQ SELECTED CHANNEL EQUALIZER
section (If EQ parameter assigned
to an Encoder, also use Encoders)
Set Layer to input, Fader mode to
Aux/Mtrx
Set Layer to input, Encoder mode
AUX
to Aux/Mtrx (Or use SELECTED
CHANNEL AUX/MATRIX SEND
LEVEL controls)
Set Layer to input
AUX
ON
Set Layer to Master, Fader mode
to Aux/Mtrx
Set Layer to Master, Encoder
AUX
mode to Aux/Mtrx (Also use
SELECTED CHANNEL AUX/
MATRIX SEND LEVEL controls)
Set Layer to master
AUX
ON
Select internal effects processors Push Parameter 1–4
—
Select Plug-Ins
—
Select User Defined Remote Layer Touch fader knob and
FADER
Select User Defined Remote Layer Press Encoder and
PAN
Punch In
Touch fader knob and
Release fader knob
1
adjust
Press Encoder and Press Encoder
adjust
Press Encoder and Press Encoder
adjust
Adjust control Press [AUTO] button
Press EQ [ON] button Press [AUTO] button
Touch fader knob and
Release fader knob
1
adjust
Press Encoder and Press Encoder
adjust
Press SELECTED CHAN-
Press [AUTO] button
NEL AUX/ MATRIX
1
SEND [ON] button
Touch fader knob and
Release fader knob
3
adjust
Press Encoder and Press Encoder
adjust
Press SELECTED CHAN-
Press [AUTO] button
NEL AUX/ MATRIX
1
SEND [ON] button
Push Parameter 1–4
control, or select the control, or select the
parameters on the parameters on the
Effect Edit page, then Effect Edit page, then
press [ENTER] press [ENTER]
Push Parameter 1–4 Push Parameter 1–4
control. Select the control. Select the
desired parameter on desired parameter on
the Plug-in Edit page, the Plug-in Edit page,
then press [ENTER] then press [ENTER]
Release fader knob
1
adjust
Press Encoder
adjust
DM2000 Version 2—Owner's Manual
207
Punch Out
2
2
2
1
2
2