Using the SELECTED CHANNEL EQUALIZER Controls
Use the LAYER buttons to select Layers, and use the [SEL] buttons to select
1
channels.
DISPLAY
CHANNEL
COPY
PASTE
Use the [EQ ON] button to turn the EQ on or off.
2
Use the GAIN controls to set the gain of each band.
3
When a GAIN control is adjusted, the gain in dB is displayed on the corresponding EQ dis-
play. If the GAIN control is not adjusted for two seconds, the EQ display returns to display-
ing the frequency.
To set the frequency, press a FREQUENCY/Q control so that the FREQUENCY
4
indicator lights up, and use the FREQUENCY/Q control to set the frequency.
The frequency is displayed by the corresponding EQ display.
5
To set the Q, press a FREQUENCY/Q control so that the Q indicator lights
up, and use the FREQUENCY/Q control to set the Q.
The Q value is displayed by the corresponding EQ display. If the Q control is not adjusted
for two seconds, the EQ display returns to displaying the frequency.
To reset an individual gain control, hold down the corresponding FREQUENCY/Q control.
To reset all gain controls, press the LOW and HIGH FREQUENCY/Q controls.
The EQ parameter ranges are as follows.
Parameter
Gain
Frequency
HPF, 10.0 to 0.10
Q
(41 steps), L.SHELF
1. The LOW and HIGH GAIN controls function as filter on/off controls when Q is set to HPF or LPF respec-
tively.
The initial EQ parameter settings are as follows.
Parameter
Gain
Frequency
Q
EQUALIZER
LOW
ATT.
FREQUENCY
FREQUENCY
Q
Q
GAIN
EQ ON
dB
125
1.00
Hz
kHz
LOW
LOW-MID
–18.0 dB to +18.0 dB (0.1 dB steps)
21.2 Hz to 20.0 kHz (120 steps per 1/12 octave)
10.0 to 0.10 (41 steps)
LOW
LOW-MID
125 Hz
1.00 kHz
L.SHELF
Using EQ
LOW MID
HIGH MID
FREQUENCY
FREQUENCY
Q
Q
GAIN
GAIN
dB
dB
4.00
10.0
Hz
Hz
kHz
kHz
HIGH-MID
1
HIGH-MID
0 dB
4.00 kHz
0.70
DM2000 Version 2—Owner's Manual
133
HIGH
GAIN
dB
Hz
kHz
HIGH
LPF, 10.0 to 0.10
(41 steps), H.SHELF
HIGH
10.0 kHz
H.SHELF