Yamaha WC42260 Owner's Manual page 313

CHORUS
Two input, two output chorus effect.
Parameter Range
FREQ. 0.05–40.00 Hz
AM DEPTH 0–100%
PM DEPTH 0–100%
MOD. DLY 0.0–500.0 ms
WAVE Sine, Tri
LSH F 21.2 Hz–8.00 kHz
LSH G –12 to +12 dB
EQ F 100 Hz–8.00 kHz
EQ G –12 to +12 dB
EQ Q 10.0–0.10
HSH F 50.0 Hz–16.0 kHz
HSH G –12 to +12 dB
SYNC OFF/ON
1
NOTE
1.
FLANGE
Two input, two output flange effect.
Parameter Range
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
MOD. DLY 0.0–500.0 ms
FB. GAIN –99 to +99%
WAVE Sine, Tri
LSH F 21.2 Hz–8.00 kHz
LSH G –12 to +12 dB
EQ F 100 Hz–8.00 kHz
EQ G –12 to +12 dB
EQ Q 10.0–0.10
HSH F 50.0 Hz–16.0 kHz
HSH G –12 to +12 dB
SYNC OFF/ON
1
NOTE
1.
Description
Modulation speed
Amplitude modulation depth
Pitch modulation depth
Modulation delay time
Modulation waveform
Low shelving filter frequency
Low shelving filter gain
EQ (peaking type) frequency
EQ (peaking type) gain
EQ (peaking type) bandwidth
High shelving filter frequency
High shelving filter gain
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine FREQ.
Description
Modulation speed
Modulation depth
Modulation delay time
Feedback gain (plus values for normal-phase feedback, minus val-
ues for reverse-phase feedback)
Modulation waveform
Low shelving filter frequency
Low shelving filter gain
EQ (peaking type) frequency
EQ (peaking type) gain
EQ (peaking type) bandwidth
High shelving filter frequency
High shelving filter gain
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine FREQ.
313
Effects Parameters
DM2000—Owner's Manual