Yamaha WC42260 Owner's Manual page 30

30
Chapter 2—Control Surface & Rear Panel
AUX/MATRIX SEND
A
AUX/MATRIX SEND DISPLAY button
The pages selected by this button depends on the type of channel currently selected. If it's
an Input Channel, it selects the Aux Send, Aux Send Pan, and Input Channel Aux View
pages. If it's an Output Channel, it selects the Matrix Send, Matrix Send Pan, and Matrix
View pages.
B
BANK button
This button is used to select Aux 1–4/Matrix 1–4, Aux 5–8, or Aux 9–12 for use with the
AUX/MATRIX LEVEL controls and [ON] buttons. When an Output Channel is selected,
the Aux 1–4/Matrix 1–4 bank is selected automatically and cannot be changed. See "Using
the SELECTED CHANNEL AUX/MATRIX SEND LEVEL Controls" on page 111 for more
information.
C
Bank indicators
These indicators show which bank of Aux/Matrix Sends has been selected by the [BANK]
button. When an Output Channel is selected, the Aux 1–4/Matrix 1–4 bank is selected auto-
matically and cannot be changed.
D
LEVEL controls
These controls are used to set the levels of the Aux or Matrix Send currently selected by the
[BANK] button. If the currently selected channel is an Input Channel, they control Aux
Send levels. If it's a Bus Out, Aux Send, or the Stereo Out, they control Matrix Send levels.
See "Setting Aux Send Levels" on page 111 and "Setting Matrix Send Levels" on page 121
for more information.
E
ON buttons
These buttons are used to mute the Aux/Matrix Sends currently selected by the [BANK]
button. The button indicators of channels that are on light up. If the currently selected
channel is an Input Channel, they mute Aux Sends. If the currently selected channel is a Bus
Out, Aux Send, or the Stereo Out, they mute Matrix Sends. See "Muting Aux Sends
(ON/OFF)" on page 112 and "Muting Matrix Sends (ON/OFF)" on page 122 for more
information.
DYNAMICS
A
DYNAMICS DISPLAY button
This button is used to select the following pages: Gate Edit, Gate Library, Comp Edit, and
Comp Library. See "Gating Input Channels" on page 85 and "Compressing Channels" on
page 137 for more information.
DM2000 Version 2—Owner's Manual
1 AUX / MATRIX SEND
DISPLAY
LEVEL
2
BANK ON
1 1
AUX / MATRIX
3
5
AUX
9
AUX
1
DYNAMICS
DISPLAY
GATE / COMP
GATE
COMP
GATE ON COMP ON
4 5
LEVEL LEVEL LEVEL
ON ON ON
2 2 3 3 4
AUX / MATRIX AUX / MATRIX AUX / MATRIX
6 7
AUX AUX AUX
10 11
AUX AUX AUX
2 3
THRESHOLD RANGE ATTACK
THRESHOLD RATIO ATTACK RELEASE
6
4
5
4
8
12
DECAY HOLD
GAIN