Yamaha WC42260 Owner's Manual page 329

M. BAND DYNA.
Two input, two output 3-band dynamics processor, with individual solo and gain reduction meter-
ing for each band.
Parameter Range
LOW GAIN –96.0 to +12.0 dB
MID GAIN –96.0 to +12.0 dB
HI. GAIN –96.0 to +12.0 dB
PRESENCE –10 to +10
CMP. THRE –24.0 dB to 0.0 dB
CMP. RAT 1:1 to 20:1
CMP. ATK 0–120 ms
CMP. REL 1
CMP. KNEE 0–5
LOOKUP 0.0–100.0 ms
CMP. BYP ON/OFF
L–M XOVR 21.2 Hz–8.00 kHz
M–H XOVR 21.2 Hz–8.00 kHz
SLOPE –6 dB, –12 dB
CEILING –6.0 dB to 0.0 dB, OFF
EXP. THRE –54.0 dB to –24.0 dB
1:1 to ∞:1
EXP. RAT
1
EXP. REL
EXP. BYP ON/OFF
LIM. THRE –12.0 dB to 0.0 dB
LIM. ATK 0–120 ms
LIM. REL 1
LIM. BYP ON/OFF
LIM. KNEE 0–5
1. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz), 3 ms–23.0 s (fs=88.2 kHz), 3 ms–21.1 s (fs=96 kHz)
Description
Low band level
Mid band level
High band level
For positive values, the threshold of the high band is lowered and
the threshold of the low band is increased. For negative values, the
opposite will occur. When set to 0, all three bands are affected the
same.
Compressor threshold
Compressor ratio
Compressor attack
Compressor release time
Compressor knee
Lookup delay
Compressor bypass
Low/mid crossover frequency
Mid/high crossover frequency
Filter slope
Specifies the maximum output level
Expander threshold
Expander ratio
Expander release time
Expander bypass
Limiter threshold
Limiter attack
Limiter release time
Limiter bypass
Limiter knee
329
Effects Parameters
DM2000—Owner's Manual