Fader Mode Section - Yamaha 02R96 Owner's Manual

174
Chapter 18—Pro Tools Remote Layer
Faders
The faders are used to set channel levels (see page 179), or to set send levels in Flip
mode (see page 181).
AUX SELECT Section
AUX SELECT [AUX 1–5] buttons are used to select sends A–E. The button indicator of the
currently selected send lights up.
ENCODER MODE Section
[PAN] (PAN) button
When this button is pressed, the Encoders work as channel panpots. Its indicator lights up
when it's pressed. See "Panning Channels" on page 179 for more information.
[AUX] (SEND LEVEL) button
When this button is pressed, the Encoders work as send level controls. Its indicator lights
up when it's pressed, and send A is selected automatically. If the Encoders are currently set
to control pan, its indicator lights automatically when one of the AUX SELECT [AUX 1–5]
(SEND A–E) buttons is pressed.

FADER MODE Section

[FADER] & [AUX] buttons
These buttons are used to select Flip mode, in which faders, Encoders, and [ON] buttons
can be used to control sends. See "Flip Mode" on page 181 for more information.
02R96—Owner's Manual
AUX SELECT
DISPLAY
1 2
AUX AUX
(SEND A) (SEND B) (SEND C)
5
AUX
(SEND E)
ENCODER MODE
DISPLAY
PAN AUX
PAN SEND LEVEL
FADER MODE
FADER
3 4
AUX AUX
(SEND D)
AUX
10
5
0
5
10
15
20
30
40
50