Table of Contents
Advertisement
Aux Sends
Below is the Fader View page for the Aux Sends.
ON/OFF: This is the On/Off parameter of the currently selected Aux Send. See "Muting
Aux Sends (ON/OFF)" on page 112 for more information.
Fader: This indicates the fader position of the currently selected Aux Send. The fader knob
appears highlighted when the fader is set to 0.0 dB. The fader position is displayed numer-
ically below the fader. See "Settings Aux Send Master Levels" on page 119 for more infor-
mation.
MATRIX PAN: These are the Matrix Send Pan controls for the currently selected Aux
Send. See "Panning Matrix Sends" on page 123 for more information.
MATRIX SEND: These are the Matrix Send Level controls for the currently selected Aux
Send. While a rotary control is selected, the Matrix Send can be turned on and off by press-
ing [ENTER]. See "Setting Matrix Send Levels" on page 121 for more information.
Meters: These meters indicate the levels of the currently selected Aux Send and its partner.
The metering position is displayed below them.
GROUP: These buttons indicate which Fader, Mute, EQ, or Comp group, if any, the cur-
rently selected Aux Send is in.
Matrix Sends
Below is the Fader View page for the Matrix Sends. The settings of the left and right channels
of the Matrix Sends can be viewed individually. Use [SEL] buttons 1–24 to toggle between
the left and right channels.
BAL: This is the Balance parameter for the currently selected Matrix Send. See "Balancing
Matrix Send Masters" on page 126 for more information.
ON/OFF: This is the On/Off parameter of the currently selected Matrix Send. See "Muting
Matrix Sends (ON/OFF)" on page 122 for more information.
Viewing Channel Fader Settings
DM2000 Version 2—Owner's Manual
153
Advertisement
Table of Contents
