Yamaha WC42260 Owner's Manual page 47

Digital production console version 2
Table of Contents

Advertisement

B
STEREO OUT +4 dB (BAL)
These balanced XLR-3-32-type connectors, nomi-
nal output level +4 dB, output the analog Stereo
Out signal and are typically connected the stereo
inputs of a 2-track recorder. They are wired pin
1–ground, pin 2–hot (+), and pin 3–cold (–). See "Stereo Out Connectors" on page 104.
C
SMALL CONTROL ROOM MONITOR OUT +4 dB (BAL)
These balanced XLR-3-32-type connectors, nomi-
nal output level +4 dB, output the analog Small
Control Room Monitor signal and are typically used
to feed the control room's nearfield monitors. See
"Control Room Monitoring" on page 158 for more information.
D
LARGE CONTROL ROOM MONITOR OUT +4 dB (BAL)
These balanced XLR-3-32-type connectors, nomi-
nal output level +4 dB, output the analog Large
Control Room Monitor signal and are typically used
to feed the control room's main monitors. See
"Control Room Monitoring" on page 158 for more information.
E
2TR IN ANALOG 1 +4 dB (BAL)
These balanced 1/4-inch TRS phone jacks, nominal input
level +4 dB, are typically used to connect the analog stereo
outputs of a 2-track recorder. Signals connected here can
be monitored via the CONTROL ROOM MONITOR
OUT by pressing the CONTROL ROOM [2TR A1] button. In addition, this input can be
patched to Input Channels or Insert Ins. See "2TR Analog INs" on page 65.
F
STEREO OUT –10 dBV (UNBAL)
These unbalanced phono connectors, nominal output level
–10 dBV, output the analog Stereo Out signal and are typically
connected to the stereo inputs of a 2-track recorder. See "Stereo
Out Connectors" on page 104.
G
2TR IN ANALOG 2 –10 dBV (UNBAL)
These unbalanced phono connectors, nominal input level
–10 dBV, are typically used to connect the analog stereo outputs
of a 2-track recorder. Signals connected here can be monitored
via the CONTROL ROOM MONITOR OUTs by pressing the
CONTROL ROOM [2TR A2] button. In addition, this input can be patched to Input Chan-
nels or Insert Ins. See "2TR Analog INs" on page 65.
OMNI OUT Section
A
OMNI OUT +4dB (BAL)
These balanced 1/4-inch TRS phone jacks, nominal output
level +4 dB, provide eight analog outputs that can be
patched to the following: Bus Outs, Aux Sends, Matrix
Sends, the Stereo Out, Insert Outs, Direct Outs, or Sur-
round Monitor Channels. See "Omni Outs" on page 65.
Female XLR plug
Female XLR plug
Female XLR plug
1/4" TRS phone plug
1
1/4" TRS phone plug
DM2000 Version 2—Owner's Manual
47
Rear Panel
2 (hot)
3 (cold)
1 (ground)
2 (hot)
3 (cold)
1 (ground)
2 (hot)
3 (cold)
1 (ground)
Tip (hot)
Ring (cold)
Sleeve (ground)
Tip (hot)
Phono plug
Sleeve (ground)
Phono plug
Tip (hot)
Sleeve (ground)
Tip (hot)
Ring (cold)
Sleeve (ground)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dm 2000 version 2

Table of Contents