Table of Contents
Advertisement
4.3 Error Messages
Message
The optional sorter (SO-30) is not installed properly. Correct the installa-
Sorter
tion.
path error
The optional bulk stacker (ST-30) tray is full. Remove paper sheets.
Stacker
paper full
The optional bulk stacker (ST-30) is not installed properly. Correct the
Stacker
installation.
path error
Replace the toner container using a new toner kit. Color of the toner con-
Toner low
tainer that needs to be replaced is represented by C (Cyan), M (Magenta), Y
C,M,Y,K
(Yellow), and K (Black).
A device not supported by the printer is installed. Install an option unit sup-
Unsupported
ported by the printer.
external device
The storage area in the hard disk for the virtual mailboxes is full. Print out
Virtual mail box
accumulated jobs in the virtual mailboxes.
full
The printer's internal memory is running low due to too many numbers of
Warning
fonts and macros downloaded. Try deleting unnecessary fonts and macros.
low memory
Table 4-3 (Continued)
†
These messages may be displayed altogether such as Install MK [A][B][C].
†† Messages separated by '( )/( )' are displayed alternately.
††† After this error has happened, page protect mode will be automatically turned on. To maintain op-
timum use of memory during printing, we recommend you manually turn off page protect mode.
See
Chapter 3 Using the Operator Panel, section 3.7.3 Page Protect Mode on page
Corrective Action
4-10
3-55.
Advertisement
Table of Contents
