Table of Contents
Advertisement
4.3 Error Messages
Message
You have inserted the wrong memory card when the Insert again mes-
Insert the same
sage was displayed. Remove the wrong memory card from the printer's
memory card
memory card slot and insert the correct memory card. The printer again
reads it from the beginning of the data.
Replace Maintenance Kit A which is displayed on your printer message
Install MK
window. Replacement of the maintenance kit is necessary at every 600,000
†
[A]
images of printing and requires professional servicing. Contact your Kyo-
cera Mita dealer.
Replace Maintenance Kit B. Replacement of the maintenance kit B is nec-
Install MK
†
essary at every 300,000 pages of printing and requires professional servic-
[B]
ing. Contact your Kyocera Mita dealer.
Replace Maintenance Kit C. Replacement of the maintenance kit C is nec-
Install MK
†
essary at every 300,000 images of printing and requires professional servic-
[C]
ing. Contact your Kyocera Mita dealer.
Current print processing cannot continue because of occurrence of KPDL
KPDL error ##
error which is categorized by ##. To print out an error report, display >
Press GO
Print KPDL err(s) from the menu system, and select On. Press the GO
key to resume printing. You can abandon printing by the CANCEL key.
If Auto Continue is set to On, printing will be automatically resumed after a
preset period of time.
The paper cassette matching the paper size and paper type of the print job is
Load Cassette #
empty. Load paper into the paper cassette as displayed in place of #. Press
††
(A4)/(PLAIN)
the GO key to resume printing.
If you want to print from a different paper source, press the
display Use alternative and you can change the source for paper
feeding. After selecting a paper source and pressing the MENU key, Paper
Handling > appears. By pressing the
appears. After setting the correct paper type, press the ENTER key and
printing starts.
If you want to print from a different paper source, see
Operator Panel, section 3.10.5 Selecting the Paper Feed Source on page
3-74.
There is no paper cassette installed in the printer that matches the paper size
Load MP Tray
and paper type of the print job. Set paper in the MP tray. Press the GO key
††
(A4)/(PLAIN)
to resume printing. (Note that feeding the paper having a paper size which
does not match the current paper size from the MP tray can cause paper jam.)
If you want to print from a different paper source, press the
display Use alternative and you can change the source for paper
feeding. After selecting a paper source and pressing the MENU key, Paper
Handling > appears. By pressing the
appears. After setting the correct paper type, press the ENTER key and
printing starts.
If you want to print from a different paper source, see
Operator Panel, section 3.10.5 Selecting the Paper Feed Source on page
3-74.
The memory card is accidentally removed from the printer's memory card
Memory card err
slot during reading. If you continue reading the memory card, insert the
Insert again
same memory card into the slot again. The printer again reads it from the
beginning of the data.
Also see
Table 4-3 (Continued)
Corrective Action
Insert the same memory
4-8
or
key to
key, the paper type settings menu
Chapter 3 Using the
or
key to
key, the paper type settings menu
Chapter 3 Using the
card.
Advertisement
Table of Contents
