Setting The Cassette Paper Type - Xerox FS-C8008DN Operation Manual

3.10.4 Setting the Cassette Paper Type

By setting a paper type (plain, recycled, etc.) to the paper cassette, you can automatically
select the paper in the paper cassette according to the paper type you command on the
printer driver. The default setting is plain paper for all paper cassettes.
For more information about paper types that you can feed from the paper cassette, see
Chapter 2 Handling Paper.
1 1 1 1
Press the MENU key.
2 2 2 2
Press the or
Paper Handling >
3 3 3 3
Press the key.
4 4 4 4
Press the or
here refers to the cassette number.)
>Cassette 1 Type
Plain
5 5 5 5
To change paper type, press the ENTER key. A blinking question mark (?) appears.
>Cassette 1 Type
? Plain
6 6 6 6
Press the or key to display the desired paper type. The message display toggles
through the following paper types:
Plain
Preprinted
Vellum
Recycled
Rough
Letterhead
Color
Prepunched
Custom 1 (to 8)
7 7 7 7
When the desired cassette type is displayed, press the ENTER key.
8 8 8 8
To exit the menu selection, press the MENU key.
key repeatedly until Paper Handling > appears.
key repeatedly until >Cassette # Type appears. (Where #
3-73
3.10 Paper Handling