Resetting The Custom Paper Type - Xerox FS-C8008DN Operation Manual

Xerox operation guide color laser printerfs-c8008n fs-c8008dnfs-c8008nfs-c8008n
Table of Contents

Advertisement

3.10 Paper Handling

3.10.9 Resetting the Custom Paper Type

6 6 6 6
When the desired fuser mode is displayed, press the ENTER key. Proceed to the next
step.
Enabling or Disabling Duplex Printing for Custom Paper Type
This parameter is valid for the FS-C8008DN printer which is equipped with the duplexer as
a standard feature. When this parameter is disabled for a Custom type, the printer does not
duplex print when the custom size is selected for the paper type in a print job.
By default, duplex printing is enabled for custom paper types. To confirm and change this,
proceed as follows:
1 1 1 1
Complete Step 3. above.
2 2 2 2
Press the
key.
3 3 3 3
Press the
or
>>Duplex Path
Enable
4 4 4 4
To change duplex printing, press the ENTER key. A blinking question mark (?)
appears.
>>Duplex Path
? Enable
5 5 5 5
Press the
or
6 6 6 6
Press the ENTER key. The duplex printing capability is changed.
7 7 7 7
To exit the menu selection, press the MENU key.
If you want to reset all custom paper type settings (1 to 8) to the factory default, proceed as
follows:
1 1 1 1
Press the MENU key.
2 2 2 2
Press the
or
Paper Handling >
3 3 3 3
Press the
key.
key repeatedly until >>Duplex Path appears.
key to change from Enable to Disable.
key repeatedly until Paper Handling > appears.
3-80

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs-c8008n

Table of Contents