Table of Contents
Advertisement
3.6.2
KC-GL Pen Width and Color
The KC-GL emulation mode enables you to set the pen widths in dots, individual pen colors
for pen numbers 1 to 8, and the KC-GL page size.
1 1 1 1
Press the MENU key.
2 2 2 2
Press the
or
key repeatedly until Emulation appears on the message display.
3 3 3 3
If the current emulation is other than KC-GL, press the ENTER key. A blinking
question mark (?) appears.
4 4 4 4
Press the
or
Emulation
KC-GL
5 5 5 5
Press the
key to move to the >KC-GL Pen Adjust> submenu. To change the
pen width and/or pen color, press the ENTER key. A blinking question mark (?)
appears.
>KC-GL Pen
Adjust ? Pen (1)
6 6 6 6
Press the
or
When the desired pen number is displayed, press the ENTER key.
7 7 7 7
To change the pen width, press the
cursor appears at the width value.
>>Pen(1) Width
02 dot(s)
8 8 8 8
Press the
or
appears. When the desired pen width is displayed, press the ENTER key.
9 9 9 9
To set the pen color, press the
ENTER key. A blinking question mark (?) appears.
>>Pen(1) Color
? Black
10
10
10
10
Press the
or
Yellow, Blue, Magenta, Cyan, White) appears. When the desired pen color is
displayed, press the ENTER key.
11
11
11
11
To set the KC-GL page size, press the
>KC-GL Page Set is displayed.
key repeatedly until KC-GL appears. Press the ENTER key.
>
key repeatedly until the desired pen number of 1 to 8 appears.
key, then press the ENTER key. A blinking
key repeatedly until the desired pen width in dots (00 to 99)
or
key. To change the pen color, press the
key repeatedly until the desired pen color (Black, Red, Green,
key twice, then Press the
3-43
3.6 Making Default Settings
or
key until
Advertisement
Table of Contents
