Table of Contents
Advertisement
A.3
General Description of Options
A.3.1
Memory Card
Caution
The printer is equipped with a slot for a memory card with the maximum size of 256 MB. A
memory card is useful for storing fonts, macros, and overlays. You can use the IC Link for
Windows utility to download fonts, etc., to a flash memory card. This software is included
in the CD-ROM supplied with the printer.
Reading Font from the Memory Card
Once inserted in the printer's slot, the contents of the memory card can be read from the
control panel or automatically when you power on or reset the printer. To manually read
read data in the memory card, see
the Memory Card on page
•
Before inserting a memory card in the printer, make sure that the printer is
switched off.
•
This printer remains energized for 30 minutes even after it is powered off
for internal cooling. Unplug the power cord before inserting the memory
card in the printer. Power on the printer immediately after you finish
inserting the memory card.
Insert the memory card in the memory card slot.
Figure A-8
Chapter 3 Using the Operator Panel, section 3.9.1 Using
3-60.
Memory Card Slot
A-7
Memory Card
Advertisement
Table of Contents
