Understanding Messages Requesting Toner Container Replacement - Xerox FS-C8008DN Operation Manual

Xerox operation guide color laser printerfs-c8008n fs-c8008dnfs-c8008nfs-c8008n
Table of Contents

Advertisement

5.1.2

Understanding Messages Requesting Toner Container Replacement

The printer displays messages for individual colors at two stages of toner usage. This
message is automatically alternated with the other printer message (such as Ready):
When the printer becomes low on toner, for example in the cyan container, the printer
displays the message
replacement is not always necessary at this stage.
If you ignore the above message and continue printing, the printer displays the message
Replace Toner
replaced immediately. Clean the separate charger wires, etc. After the cleaning is
finished, however, the message does not automatically change to
printing, you must press the
In either case, to replace the toner container, see
on page
5-2.
Toner low C
,
M
,
Y
,
K
— just before the toner is used up. The toner container must be
GO
key and make the printer ready.
Section 5.1 Toner Container Replacement
5-3
5.1 Toner Container Replacement
as the first caution. Note the
Ready
. To restart

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs-c8008n

Table of Contents