Mounting The Gprs/Umts Antenna - Raven SBGuidance Auto Installation Manual

Hydraulics (non steer-ready)
Hide thumbs Also See for SBGuidance Auto:
Table of Contents

Advertisement

6.6 Mounting the GPRS/UMTS antenna

If a SlingShot modem is used, in addition to the GPS-
antenna, two GPRS / UMTS antennas and a GPS patch
should be mounted.
The GPRS / UMTS-antennas should be mounted at
least 100 cm of each other (like the CNH antenna-
bracket in Figure 47). If a standard GPS-antenna
bracket is mounted, one of the GPRS / UMTS-antennas
should be mounted on this bracket (Figure 46). The
second GPRS / UMTS-antenna should be mounted on
a metal bracket on the cabin (Figure 48).
It is important that the following conditions are met at
all times:
The GPRS/UMTS antenna is equipped with a
magnetic base and must be placed on top of
the cabin.
The antenna should have a clear reception all
round.
Label the antenna cables inside the cabin with
labels 'Cellular' and 'Diversity' (Figure 49).
Mount a grey SMA grip on both connectors
(Figure 49).
Page42/52 I SBG-Auto CAN-EN-Rev. A
SBGuidance Auto I Rev. A I CAN
Figure 46 GPS antenna bracket with a Laird UMTS
antenna.
Figure 47 Case New Holland with GPS-antenna, GPS
patch antenna and two GPRS/UMTS antenna's.
Figure 48 GPRS/UMTS-antenna and GPS patch
antenna on a metal bracket.

Advertisement

Table of Contents
loading

Table of Contents