Raven SBGuidance Auto Installation Manual page 27

SBGuidance Auto I Rev. A I CAN
An 'operator presence cable' connects the seat switch
of the tractor to the DynamIQ ISO. A few seconds after
the driver has left the seat, the automatic steering will
be deactivated.
To connect the seat switch to the DynamIQ ISO,
disconnect the current connectors of the seat switch of
the tractor and mount the SBG seat switch cable in
between these connectors. Cables for various types of
tractors are available on request.
Figure 17 The short connection cable on the terminal
harness.
Figure 18 Master switch connected to the terminal
harness.
SBG-Auto CAN-EN-Rev. A I Page 27/52