Convert Original Parameterization (Optional)) - Honeywell GasLab Q2 Manual

8.4.13. Convert original parameterization (optional))

Background: If, after the software update, the versions of the basic system in the device and the
parameterization no longer match, the original parameterization is no longer compatible, but can
be easily converted.
To ensure the compatibility of the original parameterization with newer software modules,
•
open the parameterization read out for this purpose in the previous section for
editing and mark the root of the parameter tree with the device designation in
the parameter window.
On the Configuration tab page, you can see the software modules that can be parameterized,
i.e. the basic system and all AFBs used in the parameterization with version information. (See
figure).
•
Select the new version for the basic system in the Version column. enSuite
searches for the versions of the AFBs that match the basic system and
highlights them in
adapted automatically).
Information for general use
Rev. M / 73023639
CONFIGURATION AND ANALYSIS SOFTWARE ENSUITE
Figure 8.40: Possible Versions of Basic System
green, similar to the example above (the other modules are
204 GasLab Q2