8.4.14. Special case: bugfix software
The special thing about a bugfix software is that typically only one AFB is published.
No suitable enSuite is published, which means that your enSuite installation does
To enable the transfer of a bugfix software to the enCore device, you have to
Allow installation of a bugfix software in enSuite
•
Open the menu item Extras – Options in enSuite.
•
Select the Allow bugfix installation checkbox.
As soon as you confirm the setting with [OK] , software modules with a revision change can be
transferred to the enCore device.
Information for general use
Rev. M / 73023639
CONFIGURATION AND ANALYSIS SOFTWARE ENSUITE
With this AFB only the revision letter is increased.
not know the new device software.
explicitly allow this installation in enSuite
Figure 8.42: Allow installation of Bugfix firmware
206
GasLab Q2