Honeywell GasLab Q2 Manual page 100

Navigation options in the Home display
Selecting a symbol (using the superimposition keys) in the Home display will open it to display the
functions grouped in this folder. If only one function is assigned to this symbol, selecting it will
immediately take you to the main display of this function.
Symbol Explanation
The "Globe"enables you to change the language to the language stated below the
1
symbol.
The displays behind "Info (System) Q2" provide an overview of "Serial number", "TLS-
Certificate", "Device monitor", "Software status", "Display test" and "License info". The
2
state of the security switch is also specified.
 sections 7.3.2, 7.3.3, 7.3.4, 7.3.5, 7.3.6,
The "Error List – Main display" display contains a complete list of all active errors and
3
those which are no longer active (but have not been accepted).
 section
The gear wheel symbol opens the System display, another node to the displays for the
4
time service, user management, logbooks and I/O functions
 sections 7.3.9, 7.3.10, 7.3.11, 7.3.12, 7.3.13,
The Q2 sensor values display supplies the current incoming measurements (raw
5
values) from the transmitters and sensors inside the device.
 section
The displays under "Q2 control" enable a calibration or test gas measurement to be
6
started and adjusted and the touchscreen to be deactivated.
 section
The symbol designated Q2 also enables you to access the Q2 main display (device
7
starting screen) or further information
 section
The "User archives" display enables you to select various archives and view them.
8
 section
The "Modbus" display enables you to select various tabs and view them.
9
 section
Information for general use
Rev. M / 73023639
GASLAB Q2 DISPLAYS (OPERATE THE DEVICE)
7.3.8 Error List – Main display (accepting / quit error messages)
7.3.15 Display Q2 sensor values
7.3.16 Display Q2 control (calibration/verification/touch)
7.3.17 Q2 main display (calculation standard)
7.3.18 Display User archives
7.3.19 Display Modbus
7.3.7
7.3.14
100 GasLab Q2